Maintenance Mode - Dell V505 User Manual

NOTE:
display instead.
Set IP Gateway
Use the keypad to enter an IP Gateway. Press the Select button
NOTE:
display instead.
*Factory default setting/Current setting selected by user

Maintenance Mode

Main Menu Mode Main Menu
Maintenance Ink Levels
Clean Cartridges
Align Cartridges
Print Test Page
To view or change the Maintenance Mode menu settings:
1. From the main menu, use the left and right Arrow buttons
2. Press the Select button
3. Use the left and right Arrow buttons
the Select button
From this You can:
menu:
Ink Levels
Press the Select button
Clean
Press the Select button
Cartridges
page when printing is complete.
Align
Press the Select
Cartridges
page when printing is complete.
Print Test
Press the Select
Page
The IP netmask cannot be changed if DHCP is enabled. View IP Netmask appears on the
The IP gateway cannot be changed if DHCP is enabled. View IP Gateway appears on the
.
.
to view the level of ink in both cartridges.
to clean the ink cartridges. A cleaning page prints. You may discard the
button to align the ink cartridges. An alignment page prints. You may discard the
button to print a test page. You may discard the page when printing is complete.
to scroll to MAINTENANCE.
until the heading you want appears on the display, and then press
to save the settings.