Maintenance Mode Menu - Dell 966 User Manual

You can view or change the settings in the TCP/IP Menu by selecting TCP/IP from the Network Setup menu.
Menu Settings
item
Enable
Yes*
DHCP
No
NOTE: You cannot change or set an IP Address, IP Netmask, and IP Gateway if DHCP is enabled.
Set IP Press the Select button
Address
From the Set IP Address menu, use the keypad to enter an IP address. Press the right Arrow button
enter a set of numbers in the next field, or press the left Arrow button
button to save the settings.
NOTE:
The IP address cannot be changed if DHCP is enabled.
Set IP Press the Select button
Netmask
From the Set IP Netmask menu, use the keypad to enter an IP address. Press the right Arrow button
enter a set of numbers in the next field, or press the left Arrow button
button to save the settings.
NOTE:
The IP address cannot be changed if DHCP is enabled.
Press the Select button
Set IP
Gateway
From the Set IP Gateway menu, use the keypad to enter an IP address. Press the right Arrow button
enter a set of numbers in the next field, or press the left Arrow button
button to save the settings.
NOTE: The IP address cannot be changed if DHCP is enabled.
* Factory default setting
Maintenance Mode
To access Maintenance mode options:
1. From the main menu, press the up or down Arrow button
2. Press the Select button

Maintenance Mode Menu

Menu item
View Ink Levels
Clean Cartridges
Align Cartridges
Change Print Cartridges
Print Test Page
Call Diagnostics
to enter the Set IP Address menu.
to enter the Set IP Netmask menu.
to enter the Set IP Gateway menu.
.
Action
Press the Select button
Press the Select button
Press the Select button
Press the Select button
Press the Select button
Off*
Audio on
Print T30 Signals Report
Both Audio and Report
to scroll to Maintenance.
to display the current ink level for each cartridge on the screen.
to clean the ink cartridges.
to align the ink cartridges.
to view steps detailing how to change ink cartridges.
to print a test page.
to erase an entry. Press the Back
to erase an entry. Press the Back
to erase an entry. Press the Back
to
to
to