Dell V505 User Manual page 21

You are now ready to configure your adapter to work on your wireless network.
Removing and Reinstalling the Adapter
If your adapter is not functioning properly, you might need to remove the adapter and reinstall it.
NOTE: The following instructions do not apply if you purchased your printer with the network adapter pre-installed.
1. Turn off your printer, and then unplug the power cable from the wall outlet.
NOTICE: Failure to unplug the printer can cause damage to your printer and adapter.
2. Firmly grasp the Dell Internal Network Adapter 1150 by the side tabs, and then pull to remove.
NOTICE: Your network adapter is easily damaged by static electricity. Touch a grounded metal object before
you touch the adapter.
NOTICE: Do not grasp the antenna when removing the adapter. Pulling the antenna could damage the
adapter.
3. Reinstall the adapter following the installation instructions. For more information, see
Network Adapter
Configuring the Printer for an Ethernet Connection
1150.
Installing the Dell Internal