2. From the operator panel, use the left and right Arrow buttons
Select button
3. Use the left and right Arrow buttons
4. Use the left and right Arrow buttons
5. Use the left and right Arrow buttons
Settings are reset to factory defaults.
Changing the Default Operator Panel Settings
To change the default settings on the operator panel:
1. Turn on the printer.
2. Change the operator panel settings.
3. Use the left and right Arrow buttons
4. Use the left and right Arrow buttons
5. Use the left and right Arrow buttons
6. Use the left and right Arrow buttons
The current settings on the operator panel are saved as the new default settings.
.
to scroll to Defaults, and then press the Select button
to scroll to Set Defaults, and then press the Select button
to scroll to Use Factory, and then press the Select button
to scroll to SETUP, and then press the Select button
to scroll to Defaults, and then press the Select button
to scroll to Set Defaults, and then press the Select button
to scroll to Use Current, and then press the Select button
to scroll to SETUP, and then press the
.
.
.
.
.
.
.