Dell V505 User Manual page 96

Check the ink levels, and install new print cartridges if necessary.
For more information, see
Make sure you remove individual sheets from the paper exit tray.
To avoid ink smudging when you are using the following media, remove each sheet as it exits, and allow it to dry:
Photo paper
Glossy paper
Transparency
Labels
Envelopes
Iron-on transfers
Extend dry time when duplexing print jobs
If ink is smeared on the bottom of the pages of your duplex print jobs, extend the time for the printed side to dry before
the duplex unit feeds the paper back into the printer, and prints on the other side.
NOTE: You will need to wait a few seconds longer for your duplex print jobs to finish if you turn this feature on.
To make this feature a default for all duplex print jobs:
1. In Windows Vista:
a. Click ® Control Panel.
b. Click Hardware and Sound.
c. Click Printers.
In Windows XP, click Start® Control Panel® Printers and Other Hardware® Printers and Faxes.
In Windows 2000, click Start® Settings® Printers.
2. Right-click the Dell V505 icon.
3. Select Printing Preferences.
The Printing Preferences dialog box opens.
4. Click the Advanced tab.
5. From the 2-Sided Printing area, select Extend dry time.
6. Click OK.
To apply this feature to your current duplex print job only:
1. With your document open, click File® Print.
The Print dialog box opens.
2. Click Preferences, Properties, Options, or Setup (depending on the program or operating system).
The Printing Preferences dialog box opens.
3. Click the Advanced tab.
Replacing Ink Cartridges.