Dell V505 User Manual page 92

Install a black or photo
print cartridge on the left
side.
Install a color print
cartridge on the right side.
Install both cartridges.
Alignment problem. Remove
tape from cartridges or check
troubleshooting. Press
retry.
Black Ink Low. Order Ink @
WWW.DELL.COM/SUPPLIES.
Press to continue.
Color Ink Low. Order Ink @
WWW.DELL.COM/SUPPLIES.
Press to continue.
Photo Ink Low. Order Ink @
WWW.DELL.COM/SUPPLIES.
Press to continue.
Black and Color Ink Low.
Order Ink @
WWW.DELL.COM/SUPPLIES.
Press to continue.
Photo and Color Ink Low.
Order Ink @
WWW.DELL.COM/SUPPLIES.
Press to continue.
Left cartridge error. Replace
Cartridge.
Right cartridge error.
Replace Cartridge.
Cartridge Error. Consult User's
Guide.
Memory card problem. Ensure
that it is not damaged and is
inserted correctly.
Invalid Device. The attached
USB device is not supported.
Please disconnect and refer to
user manual.
Only one device or media card
is allowed. Please remove all
but one device or card.
Unplug the camera to use other
printer features.
Load PLAIN 8.5x11" and press
. Or Load PLAIN A4 paper
and press .
Invalid Proof Sheet. Please
reprint the proof sheet and try
paper size is selected.
An ink cartridge is missing.
A ? symbol is shown for every missing cartridge
with the message appearing below it.
The tape was not removed from the ink
cartridges before the cartridges were installed.
to
The ink cartridge is running low on ink.
An ink cartridge is invalid.
An X symbol is shown for every invalid cartridge
with the message appearing below it.
One or both of the ink cartridges is invalid.
A memory card or USB key is not inserted
correctly, is damaged, not functional, or its
format is not supported.
The attached device is not supported, or the
PictBridge-enabled digital camera is not set to
the correct USB mode.
More than one memory card or device is inserted
in the printer.
A non-functioning button is pressed while the
printer is in PictBridge mode.
A paper type other than plain paper is loaded into
the paper support when attempting to print an
alignment page, a cleaning page, or a network
setup page.
The printer detects an invalid bar code or an
error condition.
cancel the job, and choose a new
paper size.
Insert a black or photo cartridge in
the left cartridge carrier and a color
cartridge in the right carrier. For
more information, see Replacing Ink
Cartridges.
Remove the tape from the ink
cartridges. For more information,
see Replacing Ink Cartridges.
Replace the ink cartridge. For more
information, see Replacing Ink
Cartridges.
Replace the invalid ink cartridge.
For more information, see
Ink Cartridges.
Remove both cartridges, then install
one at a time to determine which is
invalid.
Remove the memory card or the
USB key. Refer to the
documentation that came with your
device for more information.
Disconnect the device, or check the
USB mode setup. Refer to the
documentation that came with your
digital camera for more information.
Remove all memory cards and
devices.
Remove the PictBridge connection
to be able to use the printer for
other functions.
Load plain paper, and then press
the Select button .
Check the proof sheet or reprint the
proof sheet. For more information,
Replacing