[Erase Leading Edge]; [Vertical Adjustment]; [Media Adjustment]; [Finisher Adjustment] - Olivetti d-COLOR MF652 Operation Manual

[Erase Leading Edge]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]
- [Erase Leading Edge]
Adjust leading edge erase width. For details on displaying this item, contact your service representative.

[Vertical Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]
- [Vertical Adjustment]
Adjust the feed direction zoom ratio of paper types. For details on displaying this item, contact your service
representative.

[Media Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]
- [Media Adjustment]
Adjust print defects (voids, white spots, roughness) that are caused by paper properties for each paper type.
Copy or print after configuration, then repeat adjustments as required.
Settings
[600dpi Front]/[600dpi
Back]/[1200dpi
Front]/[1200dpi Back]
[Paper Type]
[Adjust Value]

[Finisher Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
Adjust the staple, punch or fold position.
Settings
[Center Staple Position]
[Half-Fold Position]
[1st Tri-fold Position Ad-
justment]
[2nd Tri-fold Position Ad-
justment]
[Tri-Fold Output Setting]
[Punch Vertical Position
Adjustment]
[Punch Horizontal Position
Adjustment]
d-Color MF752/652
Description
Select the side of paper subject to defect adjustment depending on the
resolution.
• [600dpi Front]/[1200dpi Front]: Select this option if defective images
exist on the front side of 1-sided or 2-sided printing with the 600 dpi or
1200 dpi resolution.
• [600dpi Back]/[1200dpi Back]: Select this option if defective images ex-
ist on the back side of 2-sided printing with the 600 dpi or 1200 dpi res-
olution.
Select the type of paper that is used to adjust defects.
Enter an adjustment value between -8 and +7 by tapping [-] and [+].
• [-]: Tap this button if a print image has voids or white spots.
• [+]: Tap this button if the surface of the print image is rough.
[Auto] is specified by default.
Description
If the staple position is not on the fold line on saddle-stitched paper, use
this option to align the staple position on the fold. For details, refer to
page 17-14.
If the half-fold position is not on the exact center of the paper, use this op-
tion to align the fold on the center. For details, refer to page 17-15.
If the tri-fold positions are not located evenly, use this option to adjust the
first fold position. For details, refer to page 17-15.
If the tri-fold positions are not located evenly, use this option to adjust the
second fold position. For details, refer to page 17-16.
Use this option to select whether to output tri-folded paper to the normal
position or a position further away from the normal position set for this ma-
chine. For details, refer to page 17-16.
If the positions of the punch holes on the paper are displaced vertically, use
this option to adjust the punch hole positions. For details, refer to
page 17-17.
If the positions of the punch holes on the paper are displaced sideways,
use this option to adjust the punch hole positions. For details, refer to
page 17-17.
17
17-13