Olivetti d-COLOR MF652 Operation Manual page 113

Settings
[Offset]
[Staple]
[Punch]
[Fold/Bind]
Tips
- The optional Finisher is required to use the Staple function.
- To use the punch function, install the Punch Kit PK-521 or Z-Fold Unit in the optional Finisher FS-
535, or install Punch Kit PK-520 in the Finisher FS-534.
- The optional Finisher and Saddle Stitcher are required to use the Fold/Bind function.
- The optional Finisher and Saddle Stitcher are required to use the Tri-Fold function.
- To use the Z-fold function, the optional Finisher FS-535 and Z Folding Unit are required.
d-Color MF752/652
Description
Select this item when sorting by the number of copies or by page to feed
out paper.
If the Finisher is installed, the copies are fed out and stacked on top of
each other with each copy or page set staggered to separate them.
If no Finisher is installed, printed copies are fed out and sorted in an alter-
nating crisscross pattern when the following conditions are satisfied.
• 8-1/2 e 11, A4, or B5 paper is used.
• Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray
• Auto Paper for the paper size setting is set.
Select the binding positions for sheet stapling.
• [Corner]: Each set of printed sheets is stapled in a corner (top left or top
right) before it is output.
• [2 Position]: Each set of printed sheets is stapled at two positions (in the
top, left, or right) before it is output.
• [Position Setting]: Select the binding position and original loading di-
rection. If [Auto] is specified for the binding position, the binding posi-
tion is determined automatically based on the direction of the loaded
original.
Select binding positions when punching sheets.
The number of punched holes varies depending on the country you are in.
• [Position Setting]: Select the punch position and original loading direc-
tion. If [Auto] is specified for the punch position, the punch position is
determined automatically based on the direction of the loaded original.
Select how to fold or bind paper.
• [Half-Fold]: Feeds out a copied sheet by folding it in two. The [Booklet]
option is turned [ON] at the same time.
• [Center Staple & Fold]: Staples and feeds out a copied sheet by folding
it in two. The [Booklet] option is turned [ON] at the same time.
• [Tri-Fold]: Feeds out a copied sheet by folding it in three. Also select the
unit by which the paper is folded from [By Copy Job (Multiple)], [1 Unit],
and [By Page]. When you set [By Page], specify the number of pages
to be folded at one time.
• [Z-Fold]: Z-folds the long side of a copied sheet before feeding it out.
This option is available when printing paper of 11 e 17 w, 8-1/2 e 14 w,
A3 w, B4 w, or 8K w. Selecting 8-1/2 e 14 w folds paper in two instead
of Z-folding.
15
15-11