[Select Keyboard]; [Measurement Unit Settings]; [Paper Tray Settings] - Olivetti d-COLOR MF652 Operation Manual

[Select Keyboard]

To display: [Utility] - [User Settings] - [System Settings] - [Select Keyboard]
Select a keyboard type displayed in the Touch Panel.
Settings
[Standard Keyboard]
[Local Keyboard]

[Measurement Unit Settings]

To display: [Utility] - [User Settings] - [System Settings] - [Measurement Unit Settings]
Select a system of units for numeric values displayed in the Touch Panel.
Settings
[mm (Numerical Value)]
[inch (Numerical Value)]
[inch (Fraction)]

[Paper Tray Settings]

To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings]
Specify the settings related to selection and switching of paper trays.
Settings
[Auto Tray Selection Set-
tings]
[Auto Tray Switch ON/OFF]
[No Matching Paper in Tray
Setting]
[Print Lists]
[Post Inserter Settings]
d-Color MF752/652
Description
The US ASCII layout keyboard or JIS layout keyboard is displayed.
[Standard Keyboard] is specified by default.
The keyboard corresponding to the language setting is displayed.
Description
Numeric values are displayed in units of mm.
For the centimeter area, [mm (Numerical Value)] is specified as default.
Numeric values are displayed in units of inch with decimal point.
Numeric values are displayed in units of inch with fraction display.
For the inch area, [inch (Fraction)] is specified as default.
Description
When you have selected [Auto] in [Paper], select target paper trays for auto
tray selection. Also, specify the priority for the paper trays.
When printing originals by specifying a paper tray, select whether to allow
auto switching (ATS: auto tray switching) to the paper tray loaded with pa-
per of the same size when the specified tray runs out of paper.
Select the operation to be taken when there is no appropriate sized paper
in the specified paper tray.
Specify the default paper tray and printing method (1-sided or 2-sided)
used for printing reports and meter counts.
Specify the type and the size of paper to be loaded into the paper tray for
using Post Inserter.
16
16-5