[Registered Key Settings]; [Job Priority Operation Settings]; [Default Bypass Paper Type Setting] - Olivetti d-COLOR MF652 Operation Manual

17

[Registered Key Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Registered Key Settings]
Change the function to be assigned to Register key in the Control Panel.
You cannot select a function assigned to other Register key.
The following shows the default settings for the inch area.
- Register Key 1: [Scan/Fax]
- Register Key 2: [Copy]
- Register Key 3: [10 Keypad]
The following shows the default settings for the centimeter area.
- Register Key 1: [User Box]
- Register Key 2: [Scan/Fax]
- Register Key 3: [Copy]

[Job Priority Operation Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Job Priority Operation Settings]
Specify the printing priority order and whether to skip a job when you cannot perform a printing job immedi-
ately.
Settings
[Fax RX Job Priority]
[Skip Job (Fax)]
[Skip Job (Copy, Print)]

[Default Bypass Paper Type Setting]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Default Bypass Paper Type Setting]
Specify the default paper type used in the Bypass Tray. If paper is loaded into the Bypass Tray, the default
paper type is automatically set.
Settings
[Yes]/[No]
[Paper Type]
17-30
Description
Select whether to give priority to the printing of a fax if it is received during
copying or printing.
[No] is specified by default.
Select whether or not to handle the subsequent job as long as it is a print-
ing job for the received fax when printing has stopped because, for exam-
ple, there is no paper.
[Yes] is specified by default.
Select whether or not to handle the subsequent job as long as it is not a
printing job for the received fax when printing has stopped because, for ex-
ample, there is no paper.
[Yes] is specified by default.
Description
Specify whether to set the default for the paper type applied to Bypass
Tray.
[Yes] is specified by default.
Select the type of paper that is used as the default.
[Duplex 2nd Side]: Select this option when you load paper with one of the
sides already printed.
[Plain Paper] is specified by default.
d-Color MF752/652