[Leading Edge Adjustment]; [Centering] - Olivetti d-Color MF220 Copy Operations

7.1 [System Settings]

[Leading Edge Adjustment]

Adjust the starting print position at the leading edge of each type of paper (with respect to the paper feed
direction).
1
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Printer Adjustment] ö [Leading Edge Adjustment].
% To adjust the starting print position at the leading edge of the second side for 2-sided printing (with
respect to the paper feed direction), press [Leading Edge Adjustment (Duplex Side 2)].
2
Select a paper type to be adjusted.
3
Load the paper into the Bypass Tray.
4
Press the Start key.
A test pattern is printed.
5
Check that the distance from the starting print position of the test
pattern to the edge of the paper (a) is 4.2 mm.
% Press [+] or [-] to adjust the width.
Press the Start key to print a test pattern.
6
Press [OK].

[Centering]

Adjust the starting print position at the left edge of each paper tray (with respect to the paper feed direction).
0 Only 8-1/2 e 11 v (A4 v) paper can be used to adjust the Bypass Tray.
1
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Printer Adjustment] ö [Centering].
% To adjust the starting print position at the left edge of the second side for 2-sided printing (with re-
spect to the paper feed direction), press [Centering (Duplex 2nd Side)].
2
Select a paper tray to be adjusted.
3
Press the Start key.
A test pattern is printed.
4
Check that the distance from the starting print position of the test
pattern to the left edge of the paper (b) is 3.0 mm (±0.5 mm).
% Press [+] or [-] to adjust the width.
Press the Start key to print a test pattern.
5
Press [OK].
d-Color MF360/280/220 (Version 3)
7
a: 4.2 mm
b: 3.0 mm ± 0.5 mm
7-13