[Restrict Access To Job Settings]; [Expert Adjustment] - Olivetti d-COLOR MF652 Operation Manual

[Restrict Access to Job Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings]
Select whether to allow the user to change information, such as destinations and senders' E-mail addresses.
Settings
[Changing Job Priority]
[Delete Other User Jobs]
[Registering and Changing
Addresses]
[Changing Zoom Ratio]
[Change the "From" Ad-
dress]
[Change Registered Over-
lay]
[Biometric/IC Card Info.
Registration]
[Synchronize User Authen-
tication & Account Track]

[Expert Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment]
Specify this setting if the color tone of print image, staple, hole-punch, and folding positions are changed.
You can adjust various settings such as correction of printed image, adjustment of staple, hole-punch, and
folding positions.
Settings
[AE Level Adjustment]
[Printer Adjustment]
[Finisher Adjustment]
[Density Adjustment]
[Image Stabilization]
[Paper Separation Adjust-
ment]
d-Color MF752/652
Description
Select whether to allow the user to change the priority of print jobs.
If [Restrict] is selected, [Increase Priority] does not appear in [Job List]
screen.
[Allow] is specified by default.
Select whether to allow the user to delete other user jobs if user authenti-
cation is used with this machine.
If [Allow] is selected, you can delete other user jobs in [Job List] screen.
[Restrict] is specified by default.
Select whether to allow the user to register or change destinations.
[Allow] is specified by default.
Select whether to allow the user to change the user preset zoom.
[Allow] is specified by default.
Specify whether to allow the user to change the From address of the E-mail
sender.
• [Allow]: Allow the user to change "From" address.
• [Administrator E-Mail Address]: Prohibit the change of "From" address
and use the administrator's E-mail address.
• [Login User Address]: Prohibit the change of "From" address and use
user's E-mail address. The administrator's E-mail address is used if us-
er's E-mail address has not been registered.
The default is [Allow] (without user authentication) or [Login User Address]
(with user authentication).
Select whether to allow the user to overwrite or delete a registered overlay
image.
[Allow] is specified by default.
Select whether to allow the user to register or change a user's biometric or
IC card authentication information.
[Restrict] is specified by default.
Specify whether to allow users to change the settings for synchronizing
user authentication and account track when user authentication and ac-
count track are enabled.
You can set this option by selecting [Synchronize by User] in [Administrator
Settings] - [User Authentication/Account Track] - [General Settings] - [Syn-
chronize User Authentication & Account Track].
[Allow] is specified by default.
Description
Adjust the AE (Auto Exposure) level.
Adjust the print start position and defective print images.
Adjust the staple, punch or fold position.
Adjust the density of images that are printed on thick paper, OHP transpar-
encies, or envelops for each paper type and print color.
Correct the misalignment or tilt of scanning area caused by changes in the
temperature or humidity in the machine to ensure high quality printing.
Adjust the paper separation position on each side of paper for 2-sided
printing.
17
17-9