[System Auto Reset]; [Auto Reset]; [Job Reset] - Olivetti d-COLOR MF652 Operation Manual

17

[System Auto Reset]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [System Auto Reset]
Specify whether to reset all settings (except registered settings) when this machine has not been operated
for a certain period of time.
Settings
[Priority Mode]
[System Auto Reset Time]
Tips
- Log out of the Administrator Setting or User Authentication/Account Track mode according to the time
setting for [System Auto Reset Time] when user authentication/account track is active or the enhanced
security mode is enabled. If [OFF] is selected, you will be logged out after one minute.

[Auto Reset]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Auto Reset]
Specify whether to reset all settings (except registered settings) for each of Copy, Fax/Scan, User Box func-
tions when this machine has not been operated for a certain period of time.
To reset them, set the amount of time that elapses before the settings are reset.
[1] minutes is selected by default.

[Job Reset]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Job Reset]
Select whether to reset settings for the conditions that are applied when changing users or loading document
to the ADF.
Settings
[When Account is changed]
[When original is set on
ADF]
[Next Job]
[Default Basic/Enlarge Dis-
play Common Setting]
17-28
Description
Select a function that is to be displayed in preference after the settings
have been reset.
[Copy] is specified by default.
Enter the amount of time that elapses until the selected function is reset.
If you choose not to reset the settings, select [OFF].
The default is [1] min. (allowable range: [1] to [9] min.).
Description
Specify whether to initialize all settings (except registered settings) when
the key counter or management card is removed.
[Reset] is specified by default.
Specify whether to reset all settings (except registered settings) when doc-
ument is loaded on the ADF.
[Do Not Reset] is specified by default.
Select whether to reset Staple Setting, Original Set/Bind Direction settings,
and TX Settings for each job.
• [Staple Setting]: Select whether or not to take over the settings upon
completion of a job for which Staple has been specified.
[OFF] is specified by default.
• [Original Set/Bind Direction]: Select whether or not to take over the set-
tings upon completion of a job for which Original Set and Bind Direction
have been specified.
[OFF] is specified by default.
• [Reset Data After Job]: Select whether to reset all settings or destina-
tions only when resetting settings for each job in Scan/Fax TX Settings.
If you select [Confirm with User], a confirmation screen appears that
asks you if you are sure to reset settings or destinations.
The default is [Reset All].
Select whether to configure the initial values for Normal and Enlarge Dis-
play mode at the same time.
If [Apply to all] is selected, [Default Enlarge Display Settings] does not ap-
pear. Initial values for each mode that are changed in [Default Copy Set-
tings] or [Default Scan/Fax Settings] are applied to both Normal and
Enlarge Display modes.
[Do not Apply] is specified by default.
d-Color MF752/652