[Stamp Repeat] - Olivetti d-COLOR MF652 Operation Manual

[Stamp Repeat]

To display: [Copy] - [Application] - [Stamp/Composition] - [Stamp Repeat]
Stamp such as "Copy" and "Private" are printed on the entire page.
Settings
[ON]/[OFF]
[Stamp Repeat Type]
[Stamp Selection]
[Detail Setting]
[Change/Delete Position]
Tips
- You can print multiple stamps, such as registered stamp, preset stamp, date/time, job number, and se-
rial number, at a time. However, the number of stamps that can be printed may be limited depending
on the type and angle of the selected stamps.
d-Color MF752/652
Description
Press [ON] to repeat stamping.
Select a stamp used. The date and time can also be printed.
• [Preset Stamp]: Select a preset stamp to be printed.
• [Registered Stamp]: Select a registered stamp to be printed.
• [Date/Time]: Select a format (type) of date and time to be printed. The
date/time when the original was scanned is stamped on the paper.
• [Other]: Specify the job number, the machine's serial number, and dis-
tribution control number to be printed.
The registration status of the stamp is displayed.
Select the color, density, size, and pattern overwriting of print characters if
necessary.
Allows the stamp position settings to be checked, changed or deleted, if
necessary. You can change the stamp sequence and insert a space be-
tween stamps. When you select up to four stamps, you can change their
angle (within +/-45 degrees).
15
15-45