Additional Monitor Support - Datavideo TVS-1000A Instruction Manual

5.6

Additional Monitor Support

The TVS-1000A operates on multiple input and output signals. To ensure better functionality for
the preview of the signals, the user may connect additional monitors to the workstation. With a
separate monitor, the preview can be larger than the one in Production Live.
Another monitor can be used for Multiview, which is a clear interface presenting the previews
available in Production Live.
The following previews are available in Multiview:
• PREVIEW – presentation of the element chosen to be broadcasted next;
• PROGRAMME – presentation of the current signal (system output);
• Previews of virtual sets loaded into memory;
• Preview of all media loaded into virtual players;
• Camera preview (one or two, depending on system configuration).
A third monitor may, with suitable configuration, show a full-screen PREVIEW or PROGRAM view.
The third monitor can also be used for the mirror output of the talent. Refer to the section,
Configuration – Layout, for multiple monitor connection.
Hence, in order to allow the user to manage multiple monitors, a Monitor Configuration
Interface as shown in the diagram below is built into the TVS-1000A. To open the interface,
simply click "Configuration" on the tool bar, select "Configuration" option and then click
"Screens" tab. The "Screens" tab can be found on the left of the Configuration window.
In the example above, three monitors are connected and the user is thus able to shuffle monitor
assignments by making selection of the desired display in the pull-down menu below each
monitor window. The Production Module, Multiview and Program view are selected.
47