Table of Contents
Advertisement
Unpacking the SE-2800 Control Panel Keyboard
The SE-2800 Control Panel Keyboard is held in its shipping position by a securing bolt on either side. To
lower the Control Panel first remove the securing bolts as indicated below.
The bolts can then be stored on each hinge bracket before lowering the Control Panel Keyboard.
Setting up the TLM-170HM - 17" LCD monitor
Follow the steps below to set up the LCD monitor:
-
Unfasten the two silver screws on the Left and Right of the TLM-170HM drawer handle.
-
Using the handle pull out the TLM-170HM monitor until it clicks into place at the end of its rail.
-
Now bring the LCD panel into an upright viewing position.
2
1
7
Advertisement
Table of Contents
