Table of Contents
Advertisement
Unpacking the SE-900 Control Panel Keyboard
The SE-900 Control Panel Keyboard is held in its shipping position by a securing bolt on either side. To lower
the Control Panel first remove the securing bolts as indicated below.
The bolts can then be stored on each hinge bracket before lowering the Control Panel Keyboard.
Setting up the TLM-170 17" monitor
Follow the steps below to set up the LCD monitor:
-
Unfasten the two silver screws on the Left and Right of the TLM-170 drawer handle.
-
Using the handle pull out the TLM-170 monitor until it clicks into place at the end of its rail.
-
Now bring the LCD panel into an upright viewing position.
2
1
7
Advertisement
Table of Contents
