Indicator Light; Optional Audio System; Heating Modes; Standard Mode (Factory Default) - Sundance Spas Altmar Owner's Manual

880 SERIES
10.14

Indicator Light

The indicator light located on the front cabinet panel of the
hot tub is an early detection system that will notify you when
the hot tub needs immediate attention. A solid white light
indicates that all operations are normal. A solid red light
indicates that immediate attention is required to clear or fix an
error code. For a detailed explanation refer to Section 15.0, page 74.
10.15

Optional Audio System

Sundance models with the optional audio system offer
enhanced hot tub enjoyment by offering an integrated
state-of-the-art audio system. These models include
an integrated AM/FM/CD/iPod® Player receiver,
high fidelity spa engineered speakers for
unsurpassed sound quality and long-life, and an
integrated subwoofer for an enhanced acoustical
experience.
11.0

Heating Modes

The control system in your hot tub activates a programmable "Standard"
or "Economy" mode which effects when the heater operates. Refer to
Sections 11.1 and 11.2 below for additional information.
11.1

Standard Mode (Factory default)

Standard mode is typically selected by customers in cold climates where
heat up times are extended due to lower ambient temperatures. In this
mode, water temperature is regulated by the set temperature which
activates the heater automatically as needed.
11.2

Economy Mode

Economy mode is typically selected by customers in warm climates
where heat up times are minimized due to higher ambient temperatures.
In this mode, the water temperature is regulated by the set temperature
only when a programmed filter cycle is running.
11.3

Selecting Standard or Economy Mode

Press the (MOdE)
mode. The control panel's indicator on the right side of the LCD changes
to indicate which mode is selected.
Note: "Standard" is shown when Standard Mode is selected. No display
is shown when Economy Mode is selected.
Page 54
button to select either "Standard" or "Economy"