Selecting Desired Massage Action; Air Controls; Multi-Colored Led Light Operation - Sundance Spas Camdenl Certa Owner's Manual

9.3

Selecting Desired Massage Action

Your Sundance spa is equipped to allow you to customize
the massage action you desire. Each model incorporates a
massage selector that allows you to customize the mas-
sage and performance by diverting water between various
jet systems. Simply turn massage selector to position A (Combo), B, or C
to divert water pressure to various jet groups. Note: The massage
selector is designed to operate in positions A (Combo), B, and C for
optimum performance. It is considered normal for sound levels within the
valve to vary between positions due to the large amounts of water
flowing through it! For optimum filtration benefits, leave the valve in
position A when spa is covered. Select position B or C for maximum jet
performance during spa use.
9.4

Air Controls

Certain jet systems have their own air control. Each control
introduces air into the water lines that supply specific jet groups.
Simply rotate any air control knob clockwise to open, or coun-
terclockwise to close. Note: To minimize heat loss, close all air controls
when spa is not in use. Certain jets may not draw air while the jets pump
is running in low speed; this is considered normal.
9.5

Multi-Colored LED Light Operation

A. Pressing the LIGHT button activates the footwell, waterfall,
massage selector and air control LED lights in sequence as
follows: High - Medium - Low - Off.
Anytime the light system has been manually activated, it will automati-
cally turn off after approximately 2 hours. If at this time you desire more
light operation, simply turn the light system back on.
B. This button offers five light modes for your enjoyment. Press
the LIGHT MODE button to select your favorite lighting
effect as follows:
Page 24
B C
A