Sundance Spas Altmar Owner's Manual page 66

880 SERIES
2. Press the (UP)
of the CLEARRAY System from either "ON" to "OFF".
Note: If the "OFF" option is selected, then there is no need to continue
with the steps below. Selecting "OFF" disables the duration countdown
timer. Press the (dISPLAY)
temperature display.
3. Press the (SELECT)
timer.
4. Press the (UP)
timer to 365 days. If the timer is not at "0" pressing the Jets pump 1
button will not reset it.
Note: You can only program the duration if the number of days is at "0"
days or the LCD display is flashing "blb". Pressing the (UP)
at any other reading will not change it.
5. Press the (dISPLAY)
the water temperature display.
Note:
• Flashing "blb" message:
days) the display screen will flash between the water temperature
and "blb". At this time the UV lamp must be replaced, the quartz
tube must be cleaned and the duration countdown timer needs to be
reset.
• If the spa power is interrupted, the timer is not affected. The number
of days remaining is stored in the memory and will continue to
countdown once power is regained.
• If you press the
to "OFF" and press the (UP)
will reset the timer back to 365 days.
Page 60
or (dOWN)
button to return to the water
button to access the duration countdown
button to program the duration countdown
button to save changes and exit back to
When the time allotted has expired (365
(UP) button to "ON" then press the (dOWN)
button to change the status
button to "ON" again, you
button