Table of Contents
Advertisement
Data Filter: Check "Enable" to activate the Data Filter
function. Assign a start filter set for the Data Filter.
Log Flag: For troubleshooting needs you can specify the
filter log here.
None: The log function is inactive.
Block: All blocked packets will be logged.
Pass: All passed packets will be logged.
No Match: The log function will record all packets
which are unmatched.
Note:
The filter log will be displayed on the Telnet terminal
when you type the log -f command.
MAC Address for Packet Duplication: Logged packets
may also be logged to another location via Ethernet. If you
want to duplicate logged packets from the router to another
network device, you must enter the MAC Address (HEX
Format) of the other devices. Type 0 to disable the feature
(also see Duplicate to LAN). The feature will be helpful un-
der Ethernet environments.
Advanced Setup
4-19
Advertisement
Table of Contents
