Table of Contents
Advertisement
System Management
5.5 Reboot System
The Web Configurator may be used to restart your router. Click
"Reboot System " to open the following page.
There are two reboot options: Using current configuration and
Using factory default configuration. If you want to reboot the
router using current running configurations, check Using current
configuration and click "OK". To reset the router settings to
default values, check Using factory default configuration and
click "OK ".
The router will take 3 to 5 seconds to reboot the system.
5.6 Firmware Upgrade
Before upgrading your router firmware, you need to install the
Router Tools. The Firmware Upgrade Utility is included in the
tools. The following steps will guide you through an upgrade. Note
that the examples below use a Windows OS.
5-14
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor2200 and is the answer not in the manual?
Questions and answers