Table of Contents
Advertisement
Advanced Setup
General Setup: Some general settings are available from
this link.
Filter Setup: Here there are 12 filter sets for IP Filter con-
figurations.
Set to Factory Default: Click here to restore the filter rules
to default values.
4.5.2 General Setup
On the General Setup page you can enable/disable the Call Filter or
Data Filter and assign a Start Filter Set for each, configure the log
settings, and set a MAC address for the logged packets to be du-
plicated to.
Call Filter: Check "Enable" to activate the Call Filter func-
tion. Assign a start filter set for the Call Filter.
4-18
Advertisement
Table of Contents
