Table of Contents
Advertisement
VPN
"Common Settings "
• Enable this profile and give a profile name
• Select "call Direction "' to "Both "' or "Dial-In "
"Dial-In Settings "
• Specify username / password
•Select "Dial-In Type "
"TCP/IP Network Settings "
• You can leave "My WAN IP "' & "Remote Gateway
IP " as default
• Set "Remote Network IP"' & "Remote Network
Mask"
Now you can accept VPN dial in.
Note: If you have used any personal firewall on PC, for
example,"Zone Alarm", you need to disable it while
using VPN.
VPN-24
Advertisement
Table of Contents
