2.1 Before You Begin
1. Use only the power adapter supplied by us. Using an incorrectly
rated power adapter will result in damage to the router.
2. In case of emergency, unplug the power adapter first.
3. Locate the device in a clean location. Do not block the ventila-
tion slots on the rear panel.
4. Cables must be attached to the correct ports; to do otherwise
may result in damage to the router. Keep cables away from walk-
ways.
5. If you are a DSL user with USB ADSL modem, check that if
your USB ADSL modem is in the supporting list. If not, please check
the information on web to see if the router support it.
6. Before you set up the router, you need to know the router default
settings as shown on the next page:
2-2