Table of Contents
Advertisement
Your particular system will be different from the screen shown
here. Check that you have an Ethernet network card installed. If
not, refer to the card manufacturers documentation and install the
card and drivers.
If your card is installed,
1. Click the "Add" button. The Select Network Component
Type dialog box will open. The box will show four options:
Client, Adapter, Protocol, Service.
2. Select Protocol and click the "Add" button. The Select
Network Protocol dialog box will open.
3. Select Microsoft in the left scrolling window, then select
TCP/IP in the right, and click "OK". You will be returned to
the Network dialog box.
2-14
Advertisement
Table of Contents
