Table of Contents
Advertisement
VPN
Each LAN-to-LAN profile includes 4 subgroups: Common
Settings, Dial-Out Settings, Dial-In Settings, and TCP/IP
Network Settings. The following will explain each subgroup
in detail.
Common Settings
Profile Name: Specifies a name for the remote network.
Enable this profile: Check here to activate this profile.
Call Direction: Specifies the call direction for this profile. Both
means it can be used for outgoing and incoming access. Dial-
Out means it can only be used for outgoing access. Dial-In
allows only incoming access.
Idle Timeout: By default, set to 300 seconds. If the profiles
connection is idle for over the limit set by the timer, the router
will drop the connection.
Dial-Out Settings
Username: Specifies a username for authentication by the
remote router.
Password: Specifies a password for authentication by the
remote router.
Server IP/Host Name for VPN: Specifies the destination
VPN server IP or Host Name for dialup.
Type of Server I am calling: Indicates the dial-out VPN type.
PPTP: Specifies the dial-out VPN connection is PPTP.
IPSec Tunnel: Specifies the dial-out VPN connection is
IPSec Tunnel.
L2TP: Specifies the dial-out VPN connection is L2TP.
VPN-15
Advertisement
Table of Contents
