Table of Contents
Advertisement
2.4 Using the Smart Start Wizard
The Smart Start Wizard will guide you through using the Web
Configurator or Telnet Terminal (command-line based management).
Also, if your currently installed network is not located in the
192.168.1.x IP range, the wizard will find the router and change the
router 's default IP address and IP mask to match the current net-
work.
If you are familiar with using a web browser (Microsoft
Internet Explorer, Netcape Communicator, etc.) or telnet cli-
ent software, you may jump directly to the next section (page
2-18). We suggest you use the most up-to-date version of
your web browser.
Installing the Router Tools
1. Insert the CD supplied with the router into the CD-ROM
drive. The autorun CD will display the main menu.
Note:
If autorun fails to start the installation program, click
autostart.exe on the root directory of the CD to start
the program.
2. Click "Router Tools" and select the OS platform you
wish to install to. The Router Tools utilities include the
Firmware Upgrade Utility, and the Smart Start Wizard.
2-19
Advertisement
Table of Contents
