5. Make the New gateway and Installed gateways fields
blank and click "OK". A dialog box will pop up asking you
to restart the PC. Click "Y es"
2.3.3 Checking TCP/IP settings
1. After completing the previous steps, click "Start -> Run"
and type "winipcfg". The IP Configuration window will
open. If the PC does not show an IP address in the
192.168.1.2 to 192.168.1.254 range, click the "Release"
button to release the current configuration. Wait a few sec-
onds and click "Renew" to get a new IP configuration from
the router.
2. If the IP configuration is correct, you will be able to use the
PING diagnostic utility built into Microsoft Windows to ping
the router. Click "Start -> Programs -> MS-DOS Prompt".
2-17