Then, press "Install" and the firmware will be uploaded to the
router :
Step 2 - Configure your DSL setting details
Where as your log-in name and password was previously
stored on your PC (in Dial-up networking), these details
now need to be stored in the Vigor2200USB so that it
can automatically log into your ISP when required.
Open you web browser (e.g. MSIE or Netscape) and enter
the IP address of Vigor2200USB into the address bar (
http://192.168.1.1
username and password. There is none by default, so
just click "OK".
). The Vigor2200USB will ask for a
2-9