Table of Contents
Advertisement
Advanced Setup
For this example, when you in LAN1 and if you want to access the mail
server behind 203.69.175.x, the IP packets will pass through internet to
reach the mail server. If you use static route function, the IP packets can
be forwarded to the mail server through the LAN-to-LAN router directly.
Status/Action : Set to Active/Add.
Destination IP Address : Specifies the target network IP or host IP. In this
example, we use netwrk IP 203.69.175.0 as routed target.
Subnet Mask : Specific the target network mask. In this example, we hope
to forward all 203.69.175.0/32 IP packets to the gateway.
Gateway IP Address : Specifies the IP address of the next hop router.
Network Interface : LAN
4-15
Advertisement
Table of Contents
