Table of Contents
Advertisement
3.3.1 Getting USB Modem Settings
Before you connect a broadband access device, e.g. a DSL mo-
dem, to the router, you need to know what kind of Internet access
is provided by your ISP.
When you install DSL USB modem firmware via installation tool, it
will collect the following messages and configure router automati-
cally.
Driver Type: PPPoA or PPPoE
Encapsulation Mode: VC MUX or LLC/SNAP
VCI: virtual channel identifier assigned by ISP.
VPI: virtual pipe identifier assigned by ISP.
You do not need to modify the settings. But if your ISP have changed
the setting or you install the USB ADSL modem firmware from
another environment, you can click Internet Access Setup to enter
the PPPoE/PPPoA setting page to change it.
Basic Setup & Internet Access
3-7
Advertisement
Table of Contents
