Table of Contents
Advertisement
Getting Started
Rear Panel Description
The router has a reset button, a power jack, four 10/100Base-T
RJ-45 switch ports, an Uplink button, and 2 USB ports on the rear
panel:
Reset
For firmware upgrades: Press and hold the button, then power ON.
The ACT and DSL LEDs will blink simultaneously (see section 5.5).
To restore default settings: While the device is running, press the
button and hold for more than five seconds. When the ACT LED
begins to blink rapidly, release the Reset button. The router will
restart with the default configuration
PWR
Only the supplied power adapter should be connected to the
power jack.
1-6
Advertisement
Table of Contents
