Window Display; Button Function; Operation Guide - Evo 423T Owner's Manual

WINDOW DISPLAY:

1. "INCL/PULSE" window: This will display the user's incline level and user's pulse; the incline range is
from 0 to 12%. The default setting will start at 0%. When the user places both hands over the palm
pulse, it can track and display the user's pulse after 5 seconds, the LED will indicate the pulse
function. The pulse range will be from 40-200 b/pm.
2. "TIME/ DIST/CAL":"TIME'' window will alternate every five seconds; this is indicated via the LED. The
time is measured in minutes and seconds. During a Pre Set program the window will show a count
down phase, in the default manual setting the time will count on. "DIST'" window is measured in
kilometers. The default setting will start at 1km/h. ''CAL'', in the default manual setting and also during
the Pre Set programs you will have a calorie count available. This will automatically count upward for
the duration of use.
3. "SPEED" window: Speed is shown in the window on the right hand side. The range of speed is from
1.0 to 18km/h.

BUTTON FUNCTION:

1. "PROGRAM" Button: When the treadmill has been switched on start by pressing the ''PROG'' button
to scroll through " P1-P2-P3-P4-P5-P6-P7-P8-P9-P10-P10-P12-P13-P14-P15, U1-U2-U3 -FAT".

OPERATION GUIDE

6
www.evofitness.net.au