Assembly Step - Evo 423T Owner's Manual

TOOLS:
5# ALLEN WRENCH 5mm 1pcs
WRENCH W/SCREW DRIVER S=13 14 15 1pcs
Notice: Do not plug into main power before completing assembly.

ASSEMBLY STEP 1:

ASSEMBLY STEP 2:
ASSEMBLY STEP 3:
Open the carton and remove all foam and
cardboard packaging. Place the treadmill on
the ground as per diagram
Lift up the computer section and upright
posts as arrow indicates.
Notice: When you insert the pole
sections ensure that the wires do not
get caught and become damaged.
Attach upright post (3) onto MAIN
FRAME (1) using bolt (49) and lock
washer (70)
Use the 5# Allen wrench
Note: Support the Left upright with your
hand to avoid injury.
2
www.evofitness.net.au