Evo 423T Owner's Manual page 4

ASSEMBLY STEP 4:
ASSEMBLY STEP 5:
ASSEMBLY STEP 6:
ATTENTION: complete the assembly as pictured above and tighten all bolts
before you use the treadmill. Read the instructions carefully.
Slide right upright (4) onto MAIN
FRAME (1)
To attach the upright posts (4) to the
frame use bolt (49) and lock washer (70)
using the 5# Allen wrench
Note: Support the right upright with your
hand to avoid injury.
Take bolt (49) and Lock washer (70)
and insert them into R&L upright (3,
4). Using the 5# Allen wrench
Then lock the COMPUTER (75)
1. Screw the L&R handlebar cover 105,
106, 107, 108 onto L&R UPRIGHT 3 & 4
with screw (51) by using the Allen
wrench.
2. Screw the L&R upright cover 26 & 27
onto L&R UPRIGHT 3 & 4 with screw
(51) by using the Allen wrench.
3
www.evofitness.net.au