Walking Belt And Deck Lubrication - Evo 423T Owner's Manual

Table of Contents

Advertisement

1/2 turn clockwise and the right adjusting bolt 1/2 turn counterclockwise See pic B
PIC A
Picture A If the belts has drifted to the LEFT
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE
CLEANING OR SERVICING THE UNIT CLEANING
General cleaning or servicing the unit will greatly prolong the treadmill. Keep treadmill clean by dusting
regularly.
Be sure to clean the exposed part of the deck on either side of the walking belt and also the side rails.
This reduces the build up of foreign material underneath the walking belt.
The top of the belt may be cleaned with a wet, soapy cloth. Be careful to keep liquid away from inside the
motorized treadmill frame or from underneath the belt.
Warning Always unplug the treadmill from the electrical outlet before removing the motor cover.
At least once a year remove the motor cover and vacuum under the motor cover. Be careful not to
interfere with any of the wires or circuits.
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck
friction may play a major role in the function and life of your treadmill, thus requiring periodic
lubrication. We recommend a periodic inspection of the deck.
We recommend lubrication of the deck according to the following timetable:
Light use (less than 3 hours/ week) annually
Medium use (3-5 hours/ week) every six months
Heavy use (more than 5 hours/ week) every three months

WALKING BELT AND DECK LUBRICATION

Picture B if the belts has drifted to the RIGHT
13
PIC B
www.evofitness.net.au

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents