Problems & Possible Solutions - EUROCOM M590K User Manual

Problems & Possible Solutions
Problem
You turned the power on
but it doesn't work.
The Battery LED power
indicator , is blinking
orange.
You are losing battery
power too quickly.
Actual battery operating
time is shorter than
expected.
Battery missing / incorrectly installed. Check the battery bay, make sure the battery is present and
seated properly (the design of the battery only allows it to go in one way). Make sure there's
nothing interfering with the battery contacts.
Low Battery. Plug in the AC power source. If the computer doesn't start up immediately, turn it off
then on again.
The system is using too much power. If your OS has a Power Options scheme (see
Schemes" on page 3 - 4) check its settings. You may also be using a PC Card device that is
drawing a lot of power.
The battery has not been fully discharged before being recharged. Make sure the battery is fully
discharged and recharge it completely before reusing (see
9).
Power Options have been disabled. Go to the Control Panel in Windows and re-enable the
options.
A peripheral device or PC Card is consuming a lot of power. Turn off the unused device to save
power.
Possible Cause - Solution
"Battery Information" on page 3 -
Problems & Possible Solutions 8 - 7
Troubleshooting
"Power
8