Table of Contents
Advertisement
Installation
This machine is designed for indoor use only.
DO NOT install the machine in an area where
a water jet could be used to clean or rinse the machine.
Failure to follow this instruction may result in serious
electrical shock.
This grill must be installed on a level surface.
Failure to comply may result in personal injury or
equipment damage.
Installation of Cable Kit
Kit A.--3 Ft. Restrain Cable (part no. 074948) must be
installed to limit the movement of the grill. This is
necessary in order to protect the electrical conduit
from stress. The cable is made of flexible conduit.
To install the kit, look at the back of the unit. There is
a 1/2" hole on the left side of the frame, about half way
down. Remove the plug and attach the cable.
Models QS11 & QS23
Ventilation and Clearance
To ensure proper operation of this appliance it must be
installed so that products of combustion are efficiently
removed. Do not store anything on top of the grill.
Most service can be performed from the front of the
grill. When inspecting heating elements, the unit must
be disconnected and pulled out of the hood enclosure.
Allow four feet in front of the appliance for this purpose.
Grease Disposal Container
If the grill is not factory--equipped with grease disposal
containers, the store is required to provide appropriate
grease disposal containers in accordance with NSF
Standard 4 requirements.
3
110120
To the Installer
Hide quick links:
Advertisement
Table of Contents
