Taylor QS11 Original Operating Instructions page 25

Step 6
Press the MENU key again, and the message "ITM1"
will appear on the display. The letter "I" will be flashing
above the cursor.
ITM1
Step 7
Using the UP and DOWN arrow keys, enter the
desired letter (A - Z) or number (0 - 9) ( -- _ ). Once the
character letter is entered, press the MENU key to
move the cursor to the next position. Up to four
characters may be entered.
CGM1
CG - - - -
Step 8
After the last character has been entered, press the
MENU key to return to the message "NAME1".
Models QS11 & QS23
Step 9
Use the UP arrow key to display the mesage "NAME2".
Repeat steps 6-9 until all desired item names have
been entered.
Step 10
After entering the desired characters in the NAMES
screens, the control will return to "NAME1".
Press the DOWN arrow to display "NAMES".
Step 11
Press the UP arrow to display "LANGUAGE", and
press the MENU key to display "ENGLISH".
Press the MENU key to return to the "LANGUAGE"
display.
Step 12
Press the UP arrow to display "MONITOR".
Press the MENU key to display "UF XXX F" to monitor
the upper front temperature.
Step 13
Continue to press the UP arrow to monitor the
remaining five zones.
Step 14
Press the UP arrow to display "CANCEL".
Press the MENU and TEMP keys at the same time to
return to the main cooking screen.
21
Important: To the Operator