Taylor QS11 Original Operating Instructions page 22

Cook Temperatures
Step 1
To set cook temperatures, press the up or down arrow
to select the item to be changed. Press and hold the
temperature key for five seconds. After releasing the
key, the message "SU1" and the current set
temperature will be displayed. (See example below.)
SU1 400 F
(Set upper item 1)
Step 2
Use the arrow keys to adjust the desired cook
temperature setting for the upper cook surface.
Temperatures may be set for 150_F to 425_F (66_to
218_C).
Step 3
Press MENU and the message "SL1" and the current
temperature will appear on the display. (See example
below.)
SL1 325 F
(Set lower item 1)
Step 4
Use the arrow keys to adjust the desired cook
temperatures for the lower cook surface. The range for
the lower cook surface temperatures is 150_F to
400_F (66_to 204_C).
Press MENU again to return to the selected item
display.
Cook Timers
Each item selection has two programmable cook
timers. The first timer is the cook cycle timer. This timer
measures the amount of time the product should be
cooked.
The second timer is an alert timer. This timer can be
set to alert the operator to add seasonings, to turn the
product, or to start warming buns for the cooked
product.
080926
Important: To the Operator
For example, item one has been programmed to cook
for 30 seconds. The operator wishes to add salt in the
middle of the cook cycle. Timer two should then be
programmed for 15 seconds. Once the cook cycle
begins, a tone will sound 15 seconds after the first
timer starts, alerting the operator to season the
product. Press the timer key to stop the tone. The first
timer will continue to measure the full 30 second cook
cycle.
A tone will sound 5 seconds before the time elapses,
and will continue to sound until the timer key has been
pressed. (This timer can be adjusted from 0 -- 10
seconds.)
Note: The factory default settings are 30 seconds for
the first (cook cycle) timer, and 0 seconds for the
second (alert) timer. The timers can be set from 0 to
3,600 seconds. The second timer cannot be
programmed for a longer time setting than the first
timer.
To adjust the timers, press the up or down arrow to
select the item to be changed. Press and hold the timer
key for five seconds. Release the key and the
message "TM1" will appear next to the current time
setting. (See example below.)
Step 1
Press the UP or DOWN arrows to adjust the time
setting for the total cook cycle.
Step 2
Once the desired cook time has been set, press the
MENU key and the message "TM2" will appear next to
the current time setting. (See example below.)
Step 3
Press the UP or DOWN arrows to adjust the time
setting for the alert timer (timer 2).
Step 4
Once the desired alert timer has been set, press the
MENU key to return to the selected item display.
18
TM1 30
TM2 0
Models QS11 & QS23