Jet Pump Water Intake And Ride Plate; Fuses; Battery - Sea-doo GTI Operator's Manual

29) Jet Pump Water Intake
and Ride Plate
The water is drawn up by the impeller
through this opening. The water in-
take grate minimizes the entry of for-
eign objects into the propulsion sys-
tem.
NOTE: The ride plate is the heat ex-
changer for the engine cooling sys-
tem.
WARNING
Keep away from intake grate while
engine is on. Items such as long
hair, loose clothing or personal
flotation device straps can become
entangled in moving parts result-
ing in severe injury or drowning.
TYPICAL
1. Water intake
2. Ride plate
WARNING
When operating the engine while
the watercraft is out of the water,
the heat exchanger in the ride plate
may become very hot. Avoid any
contact with ride plate as burns
may occur.

30) Fuses

All Models Except RXP and
GTI Series
Fuses are located under the seat in
the bilge. Refer to MAINTENANCE for
more details.
RXP and GTI Series Models
Fuses are located under basket in
front storage compartment. Refer to
MAINTENANCE for more details.
smo2007-002-023_a
TYPICAL
1. Fuse box
2. Main fuses

31) Battery

All Models Except GTI Series
and RXP
Battery is located under seat in bilge.
Refer to SPECIAL PROCEDURES.
TYPICAL
1. Battery
_____________________
55