Faq; How Many Servers May At-530 Register Simultaneously; Why The Settings Vanish After Reboot; How To Use The Dial Rule - ATCOM AT-530 User Manual

AT-530 User Manual

9 FAQ

9.1 How many servers may AT-530 register simultaneously?

AT-530 is able to register two SIP servers simultaneously, and redundancy servers. User can configure
the dial peer to route calls between these servers. Please refer "How to use the dial rule?" for detail.

9.2 Why the settings vanish after reboot?

Please go to Config Manage Save Config to save your setting always.

9.3 How to use the dial rule?

AT-530 provide flexible dial rule, with different dial-rule configure, user can easily implement the
following function:
----Replace, delete or add prefix of the dial number.
----Make direct IP to IP call
----Place the call to different servers according the prefix.
You can click "Add" to add a new dial rule. Below is the detail setting of the dial-rule:
Phone Number: The Number suit for this dial rule, can be set as full match or prefix match. Full
match means that if the number user dialed is completely the same as this number, the call will use
this dial-rule. Prefix match means that if prefix of the number that the user dials is the same as the
prefix, the call will use this dial-rule, to distinguish from the full match case, you need to add "T" after
the prefix number in the phone number setting.
Call Mode: support SIP..
Destination (optional): call destination, can be IP or domain. Default is 0.0.0.0, in this case the call
will be routed to the Public SIP server. If you set the destination to 255.255.255.255, then the call will
be routed to the private SIP server. Also you can key other address here to make direct IP calls
Port (optional): Configure the port of the destination, default is 5060 in SIP
Alias (optional):Set up the Alias. We support four Alias as below. Alias need to co-work with the Del
Length:
add:xxx, add prefix to the phone number, can set to reduce the dial length.
all: xxx, replace the phone number with the xxx, can use as speed dial function.
del, delete the first N numbers. N is set in the Del Length
rep:xxx， replace the first N numbers. N is set in the Del Length. For Example: Use wants to place
a call 8610-62281493, then you can set the phone number in the dial rule as 010T, and set the Alias as
rep:8610, and set the Del Length to 3. Then all calls begin with 010 will be changed to 8610
xxxxxxxx.
Suffix (optional):Configure suffix, show no suffix if not set
Instance:
46/50