ATCOM AT-530 User Manual page 36

AT-530 User Manual
Show current DHCP rules
Show LAN port IP address
Show NAT info
Change LAN port IP address
Example:<config-interface-fastethernet-lan>#ip –addr 192.168.1.10 –mask 255.255.255.0
WAN interface settings
path: <config-interface-fastethernet-wan>#
[disable]enable dhcp client
[disable]enable pppoe
[disable]enable QOS
Set default gateway IP
Clear default gateway IP
Set WAN port IP address
Example:<config-interface-fastethernet-wan>#ip
255.255.255.0
You need to reconnect if the WAN port has been changed.
Show WAN port settings
MMI Filter
path: <config-mmifilter>#
add filter rule
Example:<config-mmifilter>#entry –start 202.112.20.1 –end 202.112.20.255
Delete filter rule
Example:<config-mmifilter>#no entry –start 202.112.20.1
Show filter rule
[disable]enable MMI filter
NAT settings
path: <config-nat>#
[disable]enable ftp alg
[disable]enable ipsec alg
[disable]enable pptp alg
Add TCP mapping rule
Example:<config-nat>#tcp-entry –ip 192.168.1.5 –lanport 1720 –wanport 1000
Delete TCP mapping rule
Example:<config-nat>#no tcp-entry –ip 192.168.1.5 –lanport 5060 –wanport 1000
Add UDP mapping rule
Delete UDP mapping rule
Show NAT info
Netservice
path: <config-netservice>#
Set DNS address
Example:<config-netservice>#dns –ip 202.112.10.36 _domain voip.com
Set alternate DNS address
Set hostname
Set http access port
---dhcpshow
---ipshow
---natshow
---ip –addr x.x.x.x –mask x.x.x.x
---[no]dhcp
---[no]pppoe
---[no]qos
---gateway x.x.x.x
---no gateway
---ip –address x.x.x.x -mask x.x.x.x
–addr
---show
---entry –start x.x.x.x –end x.x.x.x
---no entry –start x.x.x.x
---show
---[no]start-filter
---[no]ftpalg
---[no]ipsecalg
---[no]pptpalg
---tcp-entry –ip x.x.x.x –lanport xxx –wanport xxx
---no entry –ip x.x.x.x –lanport xxx –wanport xxx
---udp-entry –ip x.x.x.x –lanport xxx –wanport xxx
---no udp-entry –ip x.x.x.x –lanport xxx –wanport xxx
---show
---dns -ip x.x.x.x _domain xxx
---alterdns -ip x.x.x.x _domain xxx
---hostname xxx
---http-port xxx
202.112.241.100 –mask
36/50