Use Keypad Configure At-530 Ip Phone; Keypad Function - ATCOM AT-530 User Manual

AT-530 User Manual

3 Use keypad configure AT-530 IP phone

3.1 Keypad function

User can configure AT-530 through its keypad. List below is the keypad function
Keypad Mode
Idle mode ----
Sysinfo Idle mode
Menu/OK Idle mode
config mode
Exit config mode
Up Calling mode
config mode
Down Calling mode
config mode
Del Calling mode
config mode
Mute Calling mode
Out call Idle mode
In call Idle mode
Record Idle mode
Pbook Idle mode
Handfree Calling mode
Calling mode
0－9
config mode
* Calling mode
config mode
# Calling mode
Hold Calling mode
FWD Calling mode
Redial Calling mode
Send Calling mode
No.1~No.9 Idle mode
Function/Display
show current time
circularly show phone number,wan ip, gateway info
enter config mode, default password 123
confirm or enter sub-menu
exit
volume up (Max:9)
Page up
volume down (Min:1)
Page down
Delete digits
Delete digits
Mute
Outgoing call menu
Incoming call menu
Enter record menu, usage refer FAQ
Enter Phone book set up
Handfree
Digits 0~9
Hit quickly to switch between numeric or alphabetic
Use in 3-way conference call.
Use as "." In the ip address setting
Use as end key of dialing or the dial number
Hold, detail refer value add service
Transfer, detail refer value add service
Redial key
call key
Speed dial key
30/50