Table of Contents
Advertisement
AT-530 User Manual
2.3.2
LAN Config
Bridge Mode:
Enable this option to switch to bridge mode. IP phone won't assign IP for its
LAN port in bridge mode and its LAN and WAN port will be in the same network. (This setting
won't take effect unless you save the config and reboot the device)
IP Netmask: Set the IP and Netmask for the LAN
DHCP Server:
Enable DHCP service in LAN port
NAT:
Enable NAT.
Highest Priority of Voice Quality: Enable this option to guarantee voice quality. If there is
high flux in the LAN port, AT-530 will limit the stream rate.
10/50
- Quick Links:
- Wan Config
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AT-530 and is the answer not in the manual?
Questions and answers