Post Mode(Safe Mode) - ATCOM AT-530 User Manual

AT-530 User Manual

8 POST Mode(safe mode)

AT-530 provide safe mode. When there is booting problem because of setting problem or
firmware problem. User can restore the factory setting or upgrade to a new firmware to solve
this problem.
How to enter safe mode?
There will be a schedule bar in the AT-530 booting procedure, press # key within the first 5
seconds, then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST
mode. User may change the PC's IP address to 192.168.10.xx and telnet to 192.168.10.1 to
access the IP phone in POST mode.
User can accord the guide in post mode to clear the settings or upgrade the firmware.
45/50