Speed Sensor Replacement - Matrix T3X-02 Service Manual

CHaPTer 9: ParT rePlaCemeNT GUide

9.11 SPeed SeNSor rePlaCemeNT

1) Turn off power to the treadmill and disconnect the power cord.
2) Remove the front shroud as outlined in Section 9.1.
3) Unplug the speed sensor wire from the MCB (Figure A).
4) Remove the 2 screws holding the speed sensor to the motor (Figure B).
5) Remove the speed sensor (Figure C).
6) Reverse Steps 1-5 to install as new speed sensor.
7) Test the treadmill for function as outlined in Section 9.23.
fiGUre b
fiGUre a
fiGUre C
32