Console Frame Replacement - Matrix T3X-02 Service Manual

9.16 CoNSole frame rePlaCemeNT

1) Turn off power to the treadmill and disconnect the power cord.
2) Remove the console as outlined in Section 9.14.
3) Remove the 2 screws on each side holding the console frame to the handlebar frame (Figure A).
4) Remove the console frame from the handlebar frame. NOTE: The console cable wiring will need to be removed from the console frame as
it is removed (Figure B).
5) Reverse Steps 1-4 to install a new console frame.
6) Test the treadmill for function as outlined in Section 9.23.
CHaPTer 9: ParT rePlaCemeNT GUide
fiGUre a
fiGUre b
39