Adaptec Snap Server 110 User Manual page 56

Question:
How do I reset my server to
factory defaults?
How do I reset Snap Server
settings if I cannot connect to
it?
Why does Windows sometimes
inaccurately report free space?
50 Snap Server 110/210 User Guide
Answer:
Open the Administration Tool, and navigate to
Maintenance > Factory Defaults. Select from:
• Reset Network Configuration to Factory Defaults
• Reset System Settings, Network and Admin
Passwords to Factory Defaults
• Reset to default ACLs for volume: xxxx
Select the desired settings and click OK to restore default
settings.
Resetting the Snap Server to its factory default settings
does not change the existing disk configuration or erase
any data stored on your disks.
While the server is running and fully booted, push the
reset button with a paperclip. The server will reboot and
perform a limited reset to defaults, including the following:
• Clears user-defined settings such as DHCP
configuration
• Resets the server name to its default setting
(SNAP<server number>)
• Resets network speed and bonding settings to their
defaults
• Resets the Administrator password to the default
(admin)
• Resets the web server to allow http
Some Windows clients are unable to recognize free disk
space in excess of 2GB. This problem only affects the
display, it does not affect the available space or your
ability to use it. Use a Web browser to determine how
much free space is actually available.